The NuQ115B-AN-WH is the white-finish, install-spec active 15-inch subwoofer from the NuQ Series, equipped with the AN remote-trigger interface for venue control-system integration and finished in white (WH) for visually-unobtrusive permanent installation in restaurants, retail spaces, ballrooms and houses of worship. The 15-inch long-excursion low-frequency driver features a 3-inch high-temperature aluminium voice coil and a vented pole-piece for sustained thermal stability under prolonged duty cycles, mounted in a reflex-loaded enclosure tuned to 38 Hz with a single front-facing slot port. Internal Class-D amplification provides 800 W RMS to the driver from a high-efficiency switch-mode supply with active power-factor correction for stable performance on long mains runs, while onboard DSP manages input filtering, multi-band limiting, soft-knee compression to maintain musical headroom, four user-selectable application presets (Music, Live, DJ and Speech) and the 12 V AN remote-trigger logic for unattended power-up and stand-by sequencing from a venue control panel. Maximum peak SPL is 130 dB at 1 m, and the operating bandwidth is 38 Hz to 100 Hz (-10 dB) with the high-pass output filter active. The cabinet offers two combo XLR/jack inputs and a high-pass-filtered XLR through-output to satellite tops at the rear panel, alongside the AN trigger jack and a four-position preset rotary. Power-input is Powercon TRUE1 with a linked through connector for daisy-chained mains distribution. Construction is 18 mm Baltic birch with a white polyurethane finish and a perforated white powder-coated steel grille backed by acoustic cloth. A 35 mm top-mounted pole socket accepts the matching pole adapter for a NuQ102 or NuQ82 top cabinet, and four M10 fly points are provided on the cabinet's top panel for ground-stacking with an inverted top. Designed and engineered in the U.K. by Turbosound.